Rosslare AC-215 Manual do Utilizador descarregar pdf (Página 7)

3. In the Period for re-connecting (min) field using up-down keys set the time (in minutes) during

which the attempts to re-connect with Intellect Server will be made (Figure 3.3-2, 2).

4. From the Suceccive port dropdown list select COM–port through which there will be the

connection with Intellect Server (Figure 3.3-2, 3).

5. From the Speed dropdown list select the speed of data exchange through COM–port (Figure

3.3-2, 4).

6. To save changes click Apply (Figure 3.3-2, 5).

Configuration of Rosslare connection through COM–port is completed.

3.3.2 Configuration of Rosslare connection through TCP/IP

To configurate Rosslare connection through TCP/IP do the following:

1. Go to the setting panel of the Connection object (Figure 3.3-3).

Figure 3.3-3 Setting panel of Rosslare connection through TCP/IP configuration

2. From the Connection type dropdown list select the connection through TCI/IP (Figure 3.3-3, 1).

3. In the Period for re-connecting (min) field using up-down keys set the time (in minutes) during

which the attempts to re-connect with Intellect Server will be made (Figure 3.3-3, 2).

4. In the IP-address field using up-down keys set the IP-address of Rosslare connection (Figure

3.3-3, 3).

5. In the Port field using up-down keys set the number of Rosslare connection port (Figure 3.3-3,

4).

6. To save changes click Apply (Figure 3.3-3, 5).

Configuration of Rosslare connection through TCP/IP is completed.

3.4 Configuration of Rosslare controller

In Intellect software package the АС−215 controller object corresponds to Rosslare controller. This

object is created on the basis of the Connection object on the Hardware tab of the System settings

dialog box (Figure 3.4-1).

1 2 3 4 5 6 7 8 9 10 11 12 ... 22 23

Sem comentários

Rosslare AC-215 Manual do Utilizador Página 7