Rosslare HLX-40B Especificações descarregar pdf (Página 25)

Installation

HLX-40 Installer Manual 25

4.8 Mounting the Back Plate

4.8.1 General

To complete the installation without exposed wires, all the wiring should be

done through the wall. The wiring to the back plate can be done without

having exposed wires, by installing the panel on a standard electrical box, or

making a hole in the wall for the wiring.

Figure 14: Back Plate

Figure 15: Back Plate Mounting and Wiring

When drilling the hole for the wires, it is recommended to drill the hole in the

marked out area.

It is important to mount the back-plate first before connecting any of the

wiring to the unit.

4.8.2 Required Space

The required space on the wall for the panel is (L) x (H). The hole size for the

wires is 2 x 5 cm. This is to be drilled according to the openings on the back

plate.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 67 68

Sem comentários

Rosslare HLX-40B Especificações Página 25